レバーアクション スターターソレノイド BT 1965-1988 クロームメッキ
プライマリーカバー上のレバーでエンジンスタートできる装置です。
レバースイッチはスプリングで元位置に戻る設計です。
12Vリレースイッチが付属します。
クールなエンジンスタートを演出できます。
本体はアルミビレット製 クロームメッキ です。
〔適合〕
1965-1984 4速ビッグツイン
1984-1988 ソフテイル モデル
Made from CNC billet aluminum and assembled with highest quality components for long life
Replaces OE starter solenoid which are notorious for having starting problems
Just pull the lever to start your motorcycle
Gives you a cool custom old school look
Includes instructions & relay
CNC ビレット アルミニウム製で、最高品質の部品で組み立てられており、長寿命です
始動に問題が多いことで有名な OE スターター ソレノイドを交換します
レバーを引くだけでバイクを始動できます
カスタムのオールドスクールな外観がクールに演出されます
説明書とリレーが付属
V-FACTOR
chrome Radiused Corners Style Lever
Fits Big Twin 4 speed 1965/1986 & Softail models 1984/1988
(Refer to HD service manual)
1. Disconnect the battery negative lead.
2. Remove primary chain cover.
3. Disconnect wires from th~ ;;tarter solenoid.
4. Depress the retaf ner cap ind rentove the pin and spring.
5. Remove the old solenoid.
6. Mount the Lever Action Solenoid using new gasket and two v.. -20 x 1 hex head bolts.
7. Reinstall the spring, retainer cap and pin.
8. Make sure the starter drive gear is completely disengaged from the clutch
ring gear when the handle is not actuated.
9. Check engagement by removing 4 socket head screws from cover.
10. Pull handle forward and check for starter gear engagement. Starter gear.should contact%" Into the clutch ring gear before the handle makes ·
electrical contact. Adjustment can be m.ade by moving the contacts with the 2 attachment screws.
11. Reinstall the cover.
12. Wire according to diagram.
(HD サービス マニュアルを参照してください)
1. バッテリーのマイナス リード線を外します。
2. プライマリ チェーン カバーを取り外します。
3. スターター ソレノイドからワイヤを外します。
4. リテーナー キャップを押し下げて、ピンとスプリングを取り外します。
5. 古いソレノイドを取り外します。
6. 新しいガスケットと 2 つの 1/4-20 x 1 六角ボルトを使用して、レバー アクション ソレノイドを取り付けます。
7. スプリング、リテーナー キャップ、ピンを取り付けます。
8. ハンドルが作動していないときに、スターター ドライブ ギアがクラッチ リング ギアから完全に外れていることを確認します。
9. カバーから 4 つのソケット ヘッド ネジを外して、噛み合いを確認します。
10. ハンドルを前方に引いて、スターター ギアが噛み合っているかどうかを確認します。スターターギアは、ハンドルが電気的に接触する前にクラッチリングギアに接触する必要があります。2 つの取り付けネジで接点を動かすことで調整できます。
11. カバーを取り付けます。
12. 図に従って配線します。